Guidelines in Buying an Impact Driver

The price of an impact driver may make or break your decision in buying one. However, this should not be the only factor to consider when buying the best impact driver. There are several other features of an impact driver that you need to consider when purchasing an impact driver. Here are some of the features to look for in an impact driver.

makita18v-1

The Power of impact driver

Power is something that you should consider in an impact driver. This way, you are assured that the driver is powerful enough to carry out the tasks you require. The driver should have ample power to hit on objects that you want to drill. The power is typically measured in pounds. The more pounds it has, the more powerful the drill.

The Voltages of driver

The battery of cordless power tools arrange is 12 volt, 14.4 volts, 18 volts and 24 volts. Before the time, the impact driver used 14. 4-volt battery; But the 14.4-volt battery is backward. With 24-volt battery almost uses for big tools and now impact driver usually use 12 volts and 18 volts. The impact driver is stronger when using an 18-volt battery. I recommend some best 18v impact driver you should buy like as DewaltD825B, DEWALT DC970K, Milwaukee 2656-20, Makita XPH012 18V.With this combination, you will likely have the best impact driver at home. In addition, you should consider purchasing the battery pack of the driver.

battery

For checking resource information for the impact driver above, you can go the Brand of impact driver tools.

www.dewalt.com

www.makitatools.com

www.milwaukeetool.com

The Speed of impact driver

You should also consider the speed of the driver. You may become disappointed if you take home a drill that is too slow. Driving screws at a slow pace will not only waste your time but also your energy. You will most likely postpone work in the future since you have already wasted so much time. Thus, it is very important to consider the speed of the impact driver. The speed of the driver is typically measured in rpm or revolutions per minute. It is recommended to buy a powerful driver with an rpm of 2200 and above.

Blows per minute

BPM or blows per minute are something that you should consider looking into as well when purchasing an impact driver. This measures the number of screws that it will drive into a surface in 60 seconds. The better option would be the driver that comes with the higher number of blows. The recommended capacity of blows for an impact driver is about 2500 and above.

Additional factors to consider

Aside from the features stated above, there are other things that you might want to look into when purchasing a driver. For instance, you might want to consider the weight of the tool. If you intend to use on light projects, you may want to opt out on too heavy tools.

Another aspect to consider would be choosing between a cordless and a corded driver. If you opt for a cordless one, you should consider the charging time of the driver. You should take note of the amount of time that it takes for the driver to become fully functional again.

Size also matters when buying a driver. If you are using the tool in simple projects, a smaller one might suffice its purpose.

These are the things that you need to consider when purchasing an impact driver. If you are able to determine the best features based on your preference and the tasks you intend to use the tool for, you will likely purchase an impact driver.

Leave a Reply